DIY: Installing Deer Warning Whistles! – Why you should use screws instead of mounting tape.

So there’s been more deer around and I figured I get a some deer warning whistles and put them on my Honda Clarity . They sell similar ones online: https://amzn.to/2RfUax1 . I used screws to mount to the front of my car.

The two deer warning whistle attached on to the bumper with foam adhesive tape. There are screw holes on the mounts, however the foam tape holds it fine for about 2 years.

It finally tore the foam and the other one ripped off due to wind speed. This time around i drilled two pilot holes and added two flat head screws. I used a 1/16 drill bit ( https://amzn.to/3hc9Ziz ) on my Ryobi power drill (https://amzn.to/30quh1O ). I had to use aluminum tape (https://amzn.to/2Yl5Xvv) to make the small drill bit see my video of how i did it.

So my there are two types of whistles included in the package, one with closed back end and one with a open back end. The closed one is louder is placed on the passenger side. The open one is quieter and is placed on the driver side. When driving at highway speeds I can hear the passenger side with the passenger window down.

Enjoy and hope this helps!

Thank you for visiting and supporting SterlingW Youtube Channel!
Thanks for watching! Like, Subscribe, Leave a comment, and click the Bell button!

Thank you for visiting and supporting SterlingW Youtube Channel!
Thanks for watching! Like, Subscribe, Leave a comment, and click the Bell button!

SOCIAL MEDIA:
Join me on Youtube: https://youtu.be/TFuoiaWgvc4
Instagram: https://www.instagram.com/sterling.wong
Twitter: https://twitter.com/sterlingwong8 ( @sterlingwong8 )
Website: http://www.sterlingwong.com

Disclaimer:
This is what i do for entertainment and your viewing entertainment! Some of the stuff are entertaining, while some are just plain silly. If you do anything with your own property, you do so at your own risk.
Due to factors beyond the control of Sterlingwong, I cannot guarantee against improper use or unauthorized modifications of this information. This information is for entertainment only. Sterlingwong assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. Use this information at your own risk. Sterlingwong recommends safe practices when working on personal property , vehicles, and / or with tools seen or implied in this video. Due to factors beyond the control of Sterlingwong, no information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. Any injury, damage, or loss that may result from improper use of these tools, equipment, or from the information contained in this video is the sole responsibility of the user and not Sterlingwong.



[HCV 18] Honda Clarity Tip – Cup Holder Stuck on some bottles – Just TILT it!

HCV -Honda Clarity Tip – Cup Holder Stuck on some bottles – Just TILT it!
So I really dislike the cup holders on the 2018 Honda Clarity because it gets caught while pulling water bottles with wider bottoms upward. After my A012 service (oil change, air filter change, tire rotation) i decided to try to figure out how to solve this. I had just received a Hydro Flask 20 OZ Wide mouth ( https://amzn.to/2S1K8xZ ) and wanted to use it. It gets caught. So naturally i removed the bottom anti-slip boot from the bottle . Then I tried just tilting the bottle towards the cup holder spring and it released it without getting caught. Btw, my Youtube vlogs and reviews may also have associated affiliate links to products that may earn from qualifying purchases.

Anyhoo… Honda A012 service is all complete.

I have just completed a A012 service on my 2018 Honda Clarity. It took me about 1 hour of work and saved me time and money from going to a dealership.
For the A012 Service i needed to service or replace the following:

  1. Change the Oil and Oil Filter:
  2. Change the Honda Clarity engine air filter.
  3. Change the Honda Clarity In cabin Air filter: ( https://amzn.to/37V9cgl )
  4. Rotate Tires
  5. Check the fluid levels and check the chassis for any issues

How to reset the Honda Maintenance Minder or Service Due notice :

  1. Go to the center infotainment screen
  2. Settings.
  3. Vehicle Settings.
  4. Maintenance Minder Information.
  5. Reset All.
  6. Confirm.

Tire Rotation – I brought my Honda to my local garage to have the tires rotated. Remember to have the TPMS reset after you rotate your tires other wise it will show an error. I believe its due to the positioning and distance of the tires from the radio sensors.. i dunno.
Here is the link for the reset procedure:

Playlists:
Honda Clarity Vlog : https://www.youtube.com/playlist?list=PLKer6MqqRUgrMhCGsZ9-MbJyxtbsTAVM7
Honda Clarity Tips : https://www.youtube.com/playlist?list=PLKer6MqqRUgrt0lGwV60TxkKDXD6FApXX
Chevy Volt Vlog: https://www.youtube.com/playlist?list=PLKer6MqqRUgr1sBSRtccywl7p3tEdfGHT

Thank you for visiting and supporting SterlingW Youtube Channel!
Thanks for watching! Like, Subscribe, Leave a comment, and click the Bell button!

SOCIAL MEDIA:
Join me on Youtube: https://youtu.be/TFuoiaWgvc4
Instagram: https://www.instagram.com/sterling.wong
Twitter: https://twitter.com/sterlingwong8 ( @sterlingwong8 )
Website: http://www.sterlingwong.com

Disclaimer:
This is what i do for entertainment and your viewing entertainment! Some of the stuff are entertaining, while some are just plain silly. If you do anything with your own property, you do so at your own risk.
Due to factors beyond the control of Sterlingwong, I cannot guarantee against improper use or unauthorized modifications of this information. This information is for entertainment only. Sterlingwong assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. Use this information at your own risk. Sterlingwong recommends safe practices when working on personal property , vehicles, and / or with tools seen or implied in this video. Due to factors beyond the control of Sterlingwong, no information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. Any injury, damage, or loss that may result from improper use of these tools, equipment, or from the information contained in this video is the sole responsibility of the user and not Sterlingwong.

#roadtrippingwithclaire, #honda, #hondaclarity, #hondalove, #hondaphev, #roadtrip, #travel #travelblogger #diy #sterlingwong ,

[HCV15] Honda Clarity DIY – In-Cabin Air Filter Change – Service A012 (Part 2)

Honda Clarity Vlog 15 – A quick video on how to change in-cabin air filter or HVAC filter my 2018 Honda Clarity. This is part 2 of the Service A012 videos I made for my Road Tripping with Clare. It takes about 3 minutes to do this procedure with tools. I change my Honda Clarity when the Maintenance Minder notifies me or about every 7,000 miles on average. My first two A012 services were done at the dealership. I saved me time and money (about $100+ ) from going to a dealership to do the A012 service.
Btw, my Youtube vlogs and reviews may also have associated affiliate links to products that may earn from qualifying purchases.

Tools and materials changing out the in cabin air filter in the glove compartment:

  1. Gloves – ( https://amzn.to/35PH5Oa )
  2. Eye Protection – Safety glasses ( https://amzn.to/37UURR8 )
  3. Change the Honda Clarity In cabin Air filter: ( https://amzn.to/37V9cgl )

How to change out the in-cabin filter:

  1. Open glove box and empty out contents
  2. Push the two sides of the glove box towards the center to release side glove box door.
  3. Push the side plastic hook toward the front of the car to release the hook.
  4. With the glove box draw down, release the air filter box door by unlocking the two side clips.
  5. slide the old in cabin air filter out,
  6. Replace with new air filter.
  7. Replace air filter door to air box.
  8. Replace glove box door and replace the hook on the side.
  9. Replace contents.

For the entire A012 Service i needed to service or replace the following:

  1. Rotate Tires
  2. Check the fluid levels and check the chassis for any issues

3. Change the Oil and Oil Filter:

4. Change the Honda Clarity engine air filter

How to video: https://youtu.be/zr9hClb7tdE )
Honda Clarity engine air filter part is Part # 17220-5WJ-A01 ( https://amzn.to/2D2rOy9 )
5. Change the Honda Clarity In cabin Air filter: ( https://amzn.to/37V9cgl )

Tools and materials:

  1. Car Ramps ( https://amzn.to/30fSndo )
  2. 17 mm Socket Wrench for the Drain plug – I use a dog bone wrench for years ( https://amzn.to/2ThQcVj )
  3. Oil Filter Wrench ( https://amzn.to/2QPBmDX ) or Jar Opener Rubber Strap Wrench ( https://amzn.to/2QOt3bB )
  4. Oil Collection Pan ( https://amzn.to/35PH3G2 )
  5. Rags to check oil or spill coverage.
  6. Newspaper for coverage
  7. Gloves ( https://amzn.to/35PH5Oa )
  8. Eye Protection – Safety glasses ( https://amzn.to/37UURR8 )

HOW TO RESET Honda Maintenance Minder or Service Due notice:

  1. Go to the center infotainment screen
  2. Settings.
  3. Vehicle Settings.
  4. Maintenance Minder Information.
  5. Reset All.
    6 Confirm.

Btw, my Youtube vlogs and reviews may also have associated affiliate links to products that may earn from qualifying purchases.

Thank you for visiting and supporting SterlingW Youtube Channel!
Thanks for watching! Like, Subscribe, Leave a comment, and click the Bell button!

SOCIAL MEDIA:
Join me on Youtube: https://youtu.be/TFuoiaWgvc4
Instagram: https://www.instagram.com/sterling.wong
Twitter: https://twitter.com/sterlingwong8 ( @sterlingwong8 )
Website: http://www.sterlingwong.com

Disclaimer:
This is what i do for entertainment and your viewing entertainment! Some of the stuff are entertaining, while some are just plain silly. If you do anything with your own property, you do so at your own risk.
Due to factors beyond the control of Sterlingwong, I cannot guarantee against improper use or unauthorized modifications of this information. This information is for entertainment only. Sterlingwong assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. Use this information at your own risk. Sterlingwong recommends safe practices when working on personal property , vehicles, and / or with tools seen or implied in this video. Due to factors beyond the control of Sterlingwong, no information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. Any injury, damage, or loss that may result from improper use of these tools, equipment, or from the information contained in this video is the sole responsibility of the user and not Sterlingwong.

#roadtrippingwithclaire, #honda, #hondaclarity, #hondalove, #hondaphev, #roadtrip, #travel #travelblogger #diy #sterlingwong , dusty roads, car maintenance, how to replace honda clarity engine oil, honda clarity A012 Service, honda clarity maintenance, road trip, 2018 honda clarity, honda clarity owner, road trip ready, car review, honda clarity vlog, blog, vlog , How to check Honda Clarity Engine oil and filter change, how to, diy, owner review ,