HOW TO: Fix Broken Telephone RJ11 Connector – Using a Crimping Tool

Quick video on how to replace broken telephone RJ11 connector plugs. ( https://amzn.to/3zaQmAK ) . I use a RJ45 / RJ11 Crimpers ( https://amzn.to/3Huow5H ) to quickly cut and prep the wire and crimp the plug in about 20 seconds.

Btw, my Youtube vlogs and reviews may also have associated affiliate links to products that may earn from qualifying purchases. For items in this video, web page, or vlog, please check out other gift ideas at my Amazon lists. Visit: https://www.amazon.com/shop/sterlingw​​

About a week ago, my Uniden Radar detector ( https://amzn.to/3HrCaGK ) power cord which uses a RJ11 connector broke off. I used Loctite FUN-TAK Mounting Putty ( https://amzn.to/3qnzy5N ) for temporary fixes for my plastic parts such as to hold connectors together, such as for my RJ11 connector with a missing tab. It held the connector in place for about 3 days without issue and was easy to remove.

RJ11 connectors ( https://amzn.to/3zaQmAK )
RJ45 / RJ11 Crimpers ( https://amzn.to/3Huow5H )
Loctite FUN-TAK Mounting Putty ( https://amzn.to/3qnzy5N )

Its time to remove the temporary fix and replace the broken RJ11 telephone connector ( https://amzn.to/3zaQmAK ) for my radar detector.
My trusty crimp tool ( https://amzn.to/3Huow5H ) does both RJ45 / RJ11 connectors and i have been using it to fix network plugs as well.

For RJ11 jacks have 4 pin connectors and is pretty simple to figure out.
Just write down the order of the color cable or take a photo for reference.
I use the crimper tools sharp cutters to score the housing and cut the ends off for a straight even cut of the wires. It comes out aligned and ready. Just pull off the scored cable housing and sort the colored wires.

Slide the wires into the new connector plug and crimp using the crimping tool to seat all the wires. Overall it only takes about 20-30 seconds. The most important part is checking the wire color order. Lastly check the cable to make sure it works .Now my Uniden Radar detector ( https://amzn.to/3HrCaGK ) and it powers up!

Overall its good to know how to fix and replace broken RJ11 and RJ45 connectors for many applications for the home or car repair as many cables now use for data and power connections.

Thank you for visiting and supporting SterlingW Youtube Channel!
Thanks for watching! Like, Subscribe, Leave a comment, and click the Bell button!

Social Media 

Amazon Shop: https://www.amazon.com/shop/sterlingw
Instagram: https://www.instagram.com/sterling.wong/
Website: https://sterlingwong.com/
X: twitter.com/sterlingwong8

Disclaimer:
This is what i do for entertainment and your viewing entertainment! Some of the stuff are entertaining, while some are just plain silly. If you do anything with your own property, you do so at your own risk.
Due to factors beyond the control of Sterlingwong, I cannot guarantee against improper use or unauthorized modifications of this information. This information is for entertainment only. Sterlingwong assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. Use this information at your own risk. Sterlingwong recommends safe practices when working on personal property , vehicles, and / or with tools seen or implied in this video. Due to factors beyond the control of Sterlingwong, no information contained in this video shall create any expressed or implied warranty or guarantee of any particular rsult. Any injury, damage, or loss that may result from improper use of these tools, equipment, or from the information contained in this video is the sole responsibility of the user and not Sterlingwong.

REVIEW: Loctite FUN-TAK Mounting Putty – Soo Useful! Life hacks! Mounting and Cleaning!

I been using Loctite FUN-TAK Mounting Putty ( https://amzn.to/3qnzy5N ) for so many things other than mounting posters! This mounting putty can be used to temporarily hold plastic, metal, paper, brick, wood, and other materials in place. I use to for mounting, holding, and cleaning!

Btw, my Youtube vlogs and reviews may also have associated affiliate links to products that may earn from qualifying purchases. For items in this video, web page, or vlog, please check out other gift ideas at my Amazon lists. Visit: https://www.amazon.com/shop/sterlingw​​

I have a big ball of Loctite FUN-TAK Mounting Putty ( https://amzn.to/3qnzy5N ) to use and reuse to mount plastic parts and switches to my computer and desk. Its been holding on for months without issues. It can easily be removed.

Loctite FUN-TAK Mounting Putty ( https://amzn.to/3qnzy5N ) can also be used for cleaning hard to reach or delicate electronics to pickup dirt and dust. It sticks and pulls the dirt off. Simply shape and dap on to areas to pick up dirt.

Loctite FUN-TAK Mounting Putty ( https://amzn.to/3qnzy5N ) is also used for temporary fixes for my plastic parts such as to hold connectors together, such as for my RJ11 connector with a missing tab. It held the connector in place for about 3 days without issue and was easy to remove.

Overall its good to have some Loctite FUN-TAK Mounting Putty ( https://amzn.to/3qnzy5N ) for holding items together and other diy stuff around the house or the office.

Thank you for visiting and supporting SterlingW Youtube Channel!
Thanks for watching! Like, Subscribe, Leave a comment, and click the Bell button!

Social Media 

Amazon Shop: https://www.amazon.com/shop/sterlingw
Instagram: https://www.instagram.com/sterling.wong/
Website: https://sterlingwong.com/
X: twitter.com/sterlingwong8

Disclaimer:
This is what i do for entertainment and your viewing entertainment! Some of the stuff are entertaining, while some are just plain silly. If you do anything with your own property, you do so at your own risk.
Due to factors beyond the control of Sterlingwong, I cannot guarantee against improper use or unauthorized modifications of this information. This information is for entertainment only. Sterlingwong assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. Use this information at your own risk. Sterlingwong recommends safe practices when working on personal property , vehicles, and / or with tools seen or implied in this video. Due to factors beyond the control of Sterlingwong, no information contained in this video shall create any expressed or implied warranty or guarantee of any particular rsult. Any injury, damage, or loss that may result from improper use of these tools, equipment, or from the information contained in this video is the sole responsibility of the user and not Sterlingwong.

How to Repair: BROKEN Bathroom EXHAUST FAN VENT COVERS

How to repair a broken bathroom exhaust fan vent cover clips. If you are removing a bathroom exhaust fan vent and the plastic clips broke off, here is how to repair it. It has worked as a permanent repair to may exhaust fan vents for years. or you can just buy replacement vent cover.

Btw, my Youtube vlogs and reviews may also have associated affiliate links to products that may earn from qualifying purchases. For items in this video, web page, or vlog, please check out other gift ideas at my Amazon lists. Visit: https://www.amazon.com/shop/sterlingw​​

Stuff in this video:
Nutone Bathroom Vent Cover Replacement: https://amzn.to/305SxEZ
Nashua Foil Tape: https://amzn.to/2OidABx
Steinel Hot Glue : https://amzn.to/3uNjETF

I basically take my bathroom vents for spring cleaning with soap and brushes then rinse them off. The Nutone fan clips break after about 2 -3 years so i usually buy a new cover. But a few years ago, i just started repairing them with Nashua Aluminum foil tape and hot glue.

The foil tape is used to make a new clip to hold spring latch. The foil tape is cut into 1/4 inch pieces in 1 inch and 1/2 inch. The 1/2 inch is used to cover the adhesive side touching the spring latch. I place the spring latch back into position then tape over it with the foil tape. The tape adheres to the vent surface. Hot glue is used to reinforce the foil tape.

This DIY will last for years, and the spring latch will no longer fall off the vent cover. If your spring latch needs to be replaced, the foil and hot glue can be removed with a knife.

Thank you for visiting and supporting SterlingW Youtube Channel!
Thanks for watching! Like, Subscribe, Leave a comment, and click the Bell button!

Social Media 

Amazon Shop: https://www.amazon.com/shop/sterlingw
Instagram: https://www.instagram.com/sterling.wong/
Website: https://sterlingwong.com/
X: twitter.com/sterlingwong8

Disclaimer:
This is what i do for entertainment and your viewing entertainment! Some of the stuff are entertaining, while some are just plain silly. If you do anything with your own property, you do so at your own risk.
Due to factors beyond the control of Sterlingwong, I cannot guarantee against improper use or unauthorized modifications of this information. This information is for entertainment only. Sterlingwong assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. Use this information at your own risk. Sterlingwong recommends safe practices when working on personal property , vehicles, and / or with tools seen or implied in this video. Due to factors beyond the control of Sterlingwong, no information contained in this video shall create any expressed or implied warranty or guarantee of any particular rsult. Any injury, damage, or loss that may result from improper use of these tools, equipment, or from the information contained in this video is the sole responsibility of the user and not Sterlingwong.