COMPARED: CONAIR Turbo Extreme Steam 2 IN 1 “STEAM & IRON” VS Turbo Extreme Steam Hand Held

Last week, I bought Conair Turbo Extreme 2 IN 1 Steamer and Iron ( https://amzn.to/3GotO1X ) at Costco for $49. I am going to compare if with my trusty Conair Extreme Turbo Hand Held Steamer ( https://amzn.to/2TWJO8L ) that also bought at Costco for $39 – four years ago. This is a quick comparison. For a full review and unboxing of both, check out the videos below:

REVIEW: Costco CONAIR Turbo Extreme Steam 2 IN 1 STEAM & IRON:

REVIEW: Conair Extreme Turbo Hand Held Steamer

Btw, my Youtube vlogs and reviews may also have associated affiliate links to products that may earn from qualifying purchases. For fitness, fashion, and travel stuff, check out my Amazon list. Visit: https://www.amazon.com/shop/sterlingw

I used Conair Turbo Extreme 2 IN 1 Steamer and Iron ( https://amzn.to/3GotO1X ) to iron my pants and clear winkles and creases from my curtains very quickly. It heats and steam in less than 10 seconds! My Conair Extreme Turbo Hand Held Steamer ( https://amzn.to/2TWJO8L ) heats up in about 20 seconds and can also clear wrinkles and create creases but the fabric or clothing must be hanged. Traditional irons are heavy and need about a three to five minutes for the iron to heat up to temperature.

The 2 IN 1 is newer and generates more heat and surface area to quickly iron steam. It is heavier than the Turbo Hand Steamer as it has a larger aluminum ironing surface and a larger water reservoir. The cord length for both are very long.

Always use DISTILLED WATER to your iron or streamer otherwise the mineral deposits of regular water will destroy your steamer after a few uses. I love the Conair Turbo Extreme as it heats up and streams in about 10 seconds, relatively lightweight, easy to handle, and has a wide hot ironing surface area.

Ironing the cuffs only take about one minute to do with the Conair Turbo Extreme 2 in 1 Steamer and Iron ( https://amzn.to/3GotO1X ) due to the low wait time and large reservoir for water. The attachments were easy to use.

The delicate attachment added about a fabric shield in front of the steam and hot sole plate. The crease attachment is a large clip used to run along the side of a hanging garment to create a crease. This can be used instead of an ironing board. The silicon and nylon brush are good for pulling fabric to remove wrinkles while steaming. I used them on my curtains for fast results. The Conair Turbo Extreme Iron and Steamer 2 in 1 ( https://amzn.to/3GotO1X ) does not have narrow point like a traditional iron to detailed ironing.

Overall I like the new Conair Turbo Extreme Iron and Steamer ( https://amzn.to/3GotO1X ) and can see other uses for this. More so than my Conair Extreme Turbo Hand Held Steamer ( https://amzn.to/2TWJO8L ) that I have owned since 2017! If you already have the prior model and a iron, keep it. But if you want to iron and steam faster, get the new 2 in 1.

Stuff in this video:
Conair Turbo Extreme Iron and Steamer ( https://amzn.to/3GotO1X )
Black & Decker Clothes Iron ( https://amzn.to/3dxtxgS )
Conair Extreme Turbo Hand Held Steamer ( https://amzn.to/2TWJO8L )

Thanks for watching! Like, Subscribe, Leave a comment, and click the Bell button! Stay tuned for more.

SOCIAL MEDIA:
Join me on Youtube: https://www.youtube.com/sterlingw8
Instagram: https://www.instagram.com/sterling.wong​​
Twitter: https://twitter.com/sterlingwong8​​ ( @sterlingwong8 )
Website: http://www.sterlingwong.com​​

Disclaimer:
This is what i do for entertainment and your viewing entertainment! Some of the stuff are entertaining, while some are just plain silly. If you do anything with your own property, you do so at your own risk.
Due to factors beyond the control of Sterlingwong, I cannot guarantee against improper use or unauthorized modifications of this information. This information is for entertainment only. Sterlingwong assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. Use this information at your own risk. Sterlingwong recommends safe practices when working on personal property , vehicles, and / or with tools seen or implied in this video. Due to factors beyond the control of Sterlingwong, no information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. Any injury, damage, or loss that may result from improper use of these tools, equipment, or from the information contained in this video is the sole responsibility of the user and not Sterlingwong. 2

REVIEW: Costco CONAIR Turbo Extreme Steam 2 IN 1 STEAM & IRON

I bought Conair Turbo Extreme 2 IN 1 Steamer and Iron ( https://amzn.to/3GotO1X ) at Costco for $49. This is a full review and unboxing of this fast handheld steamer.

Btw, my Youtube vlogs and reviews may also have associated affiliate links to products that may earn from qualifying purchases. For fitness, fashion, and travel stuff, check out my Amazon list. Visit: https://www.amazon.com/shop/sterlingw

I used Conair Turbo Extreme 2 IN 1 Steamer and Iron ( https://amzn.to/3GotO1X ) to iron my pants and clear winkles and creases from my curtains very quickly. It heats and steam in less than 10 seconds!

I use a ironing board and the Conair Turbo Extreme Iron and Steamer ( https://amzn.to/3GotO1X ). Add DISTILLED WATER to your iron or streamer otherwise the mineral deposits of regular water will destroy your steamer after a few uses. I love the Conair Turbo Extreme as it heats up and streams in about 10 seconds, lightweight, easy to handle, and has a wide hot ironing surface area. Traditional irons are heavy and need about a three to five minutes for the iron to heat up to temperature.

Ironing the cuffs only take about one minute to do with the Conair Turbo Extreme 2 in 1 Steamer and Iron ( https://amzn.to/3GotO1X ) due to the low wait time and large reservoir for water. The attachments were easy to use.

The delicate attachment added about a fabric shield in front of the steam and hot sole plate. The crease attachment is a large clip used to run along the side of a hanging garment to create a crease. This can be used instead of an ironing board. The silicon and nylon brush are good for pulling fabric to remove wrinkles while steaming. I used them on my curtains for fast results.

Overall I like the new Conair Turbo Extreme Iron and Steamer ( https://amzn.to/3GotO1X ) and can see other uses for this. More so than my Conair Extreme Turbo Hand Held Steamer ( https://amzn.to/2TWJO8L ) that i have owned since 2017!

Stuff in this video:
Conair Turbo Extreme Iron and Steamer ( https://amzn.to/3GotO1X )
Black & Decker Clothes Iron ( https://amzn.to/3dxtxgS )
Conair Extreme Turbo Hand Held Steamer ( https://amzn.to/2TWJO8L )

Thanks for watching! Like, Subscribe, Leave a comment, and click the Bell button! Stay tuned for more.

SOCIAL MEDIA:
Join me on Youtube: https://www.youtube.com/sterlingw8
Instagram: https://www.instagram.com/sterling.wong​​
Twitter: https://twitter.com/sterlingwong8​​ ( @sterlingwong8 )
Website: http://www.sterlingwong.com​​

Disclaimer:
This is what i do for entertainment and your viewing entertainment! Some of the stuff are entertaining, while some are just plain silly. If you do anything with your own property, you do so at your own risk.
Due to factors beyond the control of Sterlingwong, I cannot guarantee against improper use or unauthorized modifications of this information. This information is for entertainment only. Sterlingwong assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. Use this information at your own risk. Sterlingwong recommends safe practices when working on personal property , vehicles, and / or with tools seen or implied in this video. Due to factors beyond the control of Sterlingwong, no information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. Any injury, damage, or loss that may result from improper use of these tools, equipment, or from the information contained in this video is the sole responsibility of the user and not Sterlingwong. 2

HOW TO: Iron and Finish Hemmed Pants using CONAIR TURBO EXTREME IRON + STEAMER

A last time, we showed you how to shorten and hem pants with Singer sewing machine ( https://amzn.to/3C8Xjmw ). It is fast and simple to do. To finish the hems and cuffs of these 9 pairs of new wrinkle free performance pants ( https://amzn.to/3HXnQqo ), we are going to use an Conair Turbo Extreme Iron and Steamer ( https://amzn.to/3GotO1X ) which heats and steam in less than 10 seconds! You can also just use a standard iron steamer mine is a Black & Decker Clothes Iron ( https://amzn.to/3dxtxgS ).

With newly hemmed pants you need to iron the cuffs to they are flat. To do this you need to align the cuffs, then align the pant’s crease lines. You dont want to add additional creases to the pants. I normally have the cuffs perpendicular to the creases.

I use a ironing board and the Conair Turbo Extreme Iron and Steamer ( https://amzn.to/3GotO1X ). I have used a thick towel before when I did not have a ironing board. Add DISTILLED WATER to your iron or streamer otherwise the mineral deposits of regular water will destroy your steamer after a few uses. My Conair Extreme Turbo Hand Held Steamer ( https://amzn.to/2TWJO8L ) lasted more than four years now because I only use distilled water.

I love the Conair Turbo Extreme as it heats up and streams in about 10 seconds, lightweight, easy to handle, and has a wide hot ironing surface area. Traditional irons need about a minute or two for the iron to heat up to temperature and are heavy.

Ironing the cuffs only take about one minute to do with the Conair Turbo Extreme Iron and Steamer ( https://amzn.to/3GotO1X ) due to the low wait time and large reservoir for water. The traditional iron would have taken 2-3 minutes due to the handling.

Overall I like the new Conair Turbo Extreme Iron and Steamer ( https://amzn.to/3GotO1X ) and can see other uses for this. More so than my Conair Extreme Turbo Hand Held Steamer ( https://amzn.to/2TWJO8L ) that i have owned since 2017!

How to video on shortening and hemming pants. – its really easy with a Singer sewing machine ( https://amzn.to/3C8Xjmw ). It takes about 20 minutes per pair of pants to shorten.

Btw, my Youtube vlogs and reviews may also have associated affiliate links to products that may earn from qualifying purchases. For fitness, fashion, and travel stuff, check out my Amazon list. Visit: https://www.amazon.com/shop/sterlingw

Stuff in this video:
Singer 4322 Heavy Duty Sewing Machine ( https://amzn.to/3C8Xjmw )
Thread Kit for Sewing ( https://amzn.to/3leLqoN )
Hagger Dress Pants ( https://amzn.to/3HXnQqo )
Conair Turbo Extreme Iron and Steamer ( https://amzn.to/3GotO1X )
Black & Decker Clothes Iron ( https://amzn.to/3dxtxgS )
Conair Extreme Turbo Hand Held Steamer ( https://amzn.to/2TWJO8L )

Thanks for watching! Like, Subscribe, Leave a comment, and click the Bell button! Stay tuned for more.

SOCIAL MEDIA:
Join me on Youtube: https://www.youtube.com/sterlingw8
Instagram: https://www.instagram.com/sterling.wong​​
Twitter: https://twitter.com/sterlingwong8​​ ( @sterlingwong8 )
Website: http://www.sterlingwong.com​​

Disclaimer:
This is what i do for entertainment and your viewing entertainment! Some of the stuff are entertaining, while some are just plain silly. If you do anything with your own property, you do so at your own risk.
Due to factors beyond the control of Sterlingwong, I cannot guarantee against improper use or unauthorized modifications of this information. This information is for entertainment only. Sterlingwong assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. Use this information at your own risk. Sterlingwong recommends safe practices when working on personal property , vehicles, and / or with tools seen or implied in this video. Due to factors beyond the control of Sterlingwong, no information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. Any injury, damage, or loss that may result from improper use of these tools, equipment, or from the information contained in this video is the sole responsibility of the user and not Sterlingwong. 2