Category: car review

Posted on

Waxing my car for WINTER Using a Cordless Polisher!

I like polishing and waxing my car before winter season. I got a cordless polisher ( https://amzn.to/3gjfsIB ) to quicky polish and buff the car with a polish compound ( https://amzn.to/3SbohRV ) then I use Ceramic hybrid spray ( https://amzn.to/3ETk426 ) to add water repelling properties to the paint. This whole process takes less than 1 hour to do even with a wash.

Btw, my Youtube vlogs and reviews may also have associated affiliate links to products that may earn from qualifying purchases. For items in this video, web page, or vlog, please check out other gift ideas at my Amazon lists. Visit: https://www.amazon.com/shop/sterlingw​​

I normally fix any paint chips a day prior to washing, polishing, and waxing. The cordless polisher ( https://amzn.to/3gjfsIB ) i got had a 4 mah battery that is able to complete the care in one charge. Its more convenient than pulling out my corded polisher, especially for quick jobs like this one. Its also good if you are not close to an electrical outlet. I got about 2 hours of runtime on the battery while working on my car.

I use the included 6 inch buffer pad from the kit to apply the polish compound. Then used microfiber bonnets ( https://amzn.to/3VAcOOE ) to place over my buffing foam pad to buff off polish. Lastly, I used the Ceramic hybrid spray ( https://amzn.to/3ETk426 ) to finish and coat the polish. I know the spray ceramic lasts a few months long enough to do a full detail in a few months.

Social Media 

Amazon Shop: https://www.amazon.com/shop/sterlingw
Instagram: https://www.instagram.com/sterling.wong/
Website: https://sterlingwong.com/
X: twitter.com/sterlingwong8

Disclaimer:
This is what i do for entertainment and your viewing entertainment! Some of the stuff are entertaining, while some are just plain silly. If you do anything with your own property, you do so at your own risk.
Due to factors beyond the control of Sterlingwong, I cannot guarantee against improper use or unauthorized modifications of this information. This information is for entertainment only. Sterlingwong assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. Use this information at your own risk. Sterlingwong recommends safe practices when working on personal property , vehicles, and / or with tools seen or implied in this video. Due to factors beyond the control of Sterlingwong, no information contained in this video shall create any expressed or implied warranty or guarantee of any particular rsult. Any injury, damage, or loss that may result from improper use of these tools, equipment, or from the information contained in this video is the sole responsibility of the user and not Sterlingwong.

Posted on

HOW TO: Remove Old Car Window Tint With STEAM! Conair Turbo Extreme Steam Hand Held Steamer

So 2017 Chevy Volt aftermarket car window tint film was failing and started to bubble. I was not able see to through it and needed to re tint it. The tint shop I went to closed down. Tint shops wanted about $150 to remove it and $100 for a new tint. So i decided to DIY this and save money.

Btw, my Youtube vlogs and reviews may also have associated affiliate links to products that may earn from qualifying purchases. For items in this video, web page, or vlog, please check out other gift ideas at my Amazon lists. Visit: https://www.amazon.com/shop/sterlingw​​

So the steam process of removing tint is simple and will take about 1 hour or so for me to do. I done this before with my other cars year ago. Typically car tint lasts about 5 years before it starts bubbling in the rear window.

I used my old Conair Extreme Turbo Hand Held Steamer ( https://amzn.to/2TWJO8L ) as a steamer to melt the adhesive and safety remove the tint from my rear window with defroster lines. I bought Conair Turbo Extreme 2 IN 1 Steamer and Iron ( https://amzn.to/3GotO1X ) , however I didnt want to dirty it with adhesive for my clothing. Secondly, the Conair Extreme Turbo Hand Held Steamer ( https://amzn.to/2TWJO8L ) was easier to handle, was more focused steam area for better control, and steamed very fast. I also used some microfiber towels ( https://amzn.to/3RBGaKa ) to absorb the adhesive on the final cleaning.

Basic Steps:
Work one corner of the tint use the steam to heat the adhesive. I kept the steam 1-2 cm from the window.
In a few seconds the tint will release from the glue.
I pulled one corner and continued to heat and slowly pull the tint away from the glass and defroster lines. You want the steam to release the adhesive, dont force it.
After all the tint is removed. There may be adhesive on the glass.
Wrap the microfiber towel over the hand held steamer and use it to melt and absorb the adhesive.
I had to run to passes to get all the adhesive off.

Overall it took about 1 hour to remove the tint and adhesive. Next time it would probably take 30 mins as I was being very careful.

Stuff in this video:
Conair Turbo Extreme Iron and Steamer ( https://amzn.to/3GotO1X )
Conair Extreme Turbo Hand Held Steamer ( https://amzn.to/2TWJO8L )
Microfiber towels ( https://amzn.to/3RBGaKa )
Thanks for watching! Like, Subscribe, Leave a comment, and click the Bell button! Stay tuned for more.

Social Media 

Amazon Shop: https://www.amazon.com/shop/sterlingw
Instagram: https://www.instagram.com/sterling.wong/
Website: https://sterlingwong.com/
X: twitter.com/sterlingwong8

Disclaimer:
This is what i do for entertainment and your viewing entertainment! Some of the stuff are entertaining, while some are just plain silly. If you do anything with your own property, you do so at your own risk.
Due to factors beyond the control of Sterlingwong, I cannot guarantee against improper use or unauthorized modifications of this information. This information is for entertainment only. Sterlingwong assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. Use this information at your own risk. Sterlingwong recommends safe practices when working on personal property , vehicles, and / or with tools seen or implied in this video. Due to factors beyond the control of Sterlingwong, no information contained in this video shall create any expressed or implied warranty or guarantee of any particular rsult. Any injury, damage, or loss that may result from improper use of these tools, equipment, or from the information contained in this video is the sole responsibility of the user and not Sterlingwong.

Posted on

REVIEW: NOVOO 148wh Power Station! w/ 100W AC Inverter and 60W USB C PD output!

I just got this NOVOO 148wh Power Station ( https://amzn.to/3IaWQnO ). I already own a Jackery Explorer 240 – Power Station ( https://amzn.to/3DVeKHW ) which I use every other day to work on my laptop in my car, or to play my Xbox in my car when I am waiting or parking. However, I wanted something smaller and easier to hide in my car. so I got this Novoo 148 Wh Power Station and will be doing a review on it.

Btw, my Youtube vlogs and reviews may also have associated affiliate links to products that may earn from qualifying purchases. For items in this video, web page, or vlog, please check out other gift ideas at my Amazon lists. Visit: https://www.amazon.com/shop/sterlingw​​

Why:
The NOVOO 148wh Power Station ( https://amzn.to/3IaWQnO ) is about half the physical size of Jackery Explorer 240. So I can hide this under my car seat when not in use. I realize that i only need about 1 hour of time on my laptop so the 100W AC inverter lasted about 1.5+hours for my low powered work laptop. It also has a flash light if I needed this for an emergency light. The USB ports and USB C with PD super fast charging was also great.

Charging:
It charges by the provided 15v AC adaptor or by USB C charging. This is my most liked feature from this powerstation as I have a Spigen [GaN Fast] 45W Super Fast Charger ( https://amzn.to/3yenozP ) it works really well with this unit.

Overall, NOVOO 148wh Power Station ( https://amzn.to/3IaWQnO ) will stay in my car for working for under 2 hours of work or play. The Jackery Explorer 240 – Power Station ( https://amzn.to/3DVeKHW ) will be used for situations needing a 200W AC inverter or if i plan to play or work for over 2 hours.

Thank you for visiting and supporting SterlingW Youtube Channel!
Thanks for watching! Like, Subscribe, Leave a comment, and click the Bell button! Stay tuned for more.

Social Media 

Amazon Shop: https://www.amazon.com/shop/sterlingw
Instagram: https://www.instagram.com/sterling.wong/
Website: https://sterlingwong.com/
X: twitter.com/sterlingwong8

Disclaimer:
This is what i do for entertainment and your viewing entertainment! Some of the stuff are entertaining, while some are just plain silly. If you do anything with your own property, you do so at your own risk.
Due to factors beyond the control of Sterlingwong, I cannot guarantee against improper use or unauthorized modifications of this information. This information is for entertainment only. Sterlingwong assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. Use this information at your own risk. Sterlingwong recommends safe practices when working on personal property , vehicles, and / or with tools seen or implied in this video. Due to factors beyond the control of Sterlingwong, no information contained in this video shall create any expressed or implied warranty or guarantee of any particular rsult. Any injury, damage, or loss that may result from improper use of these tools, equipment, or from the information contained in this video is the sole responsibility of the user and not Sterlingwong.

Proudly powered by WordPress