HOW TO: Iron and Finish Hemmed Pants using CONAIR TURBO EXTREME IRON + STEAMER

A last time, we showed you how to shorten and hem pants with Singer sewing machine ( https://amzn.to/3C8Xjmw ). It is fast and simple to do. To finish the hems and cuffs of these 9 pairs of new wrinkle free performance pants ( https://amzn.to/3HXnQqo ), we are going to use an Conair Turbo Extreme Iron and Steamer ( https://amzn.to/3GotO1X ) which heats and steam in less than 10 seconds! You can also just use a standard iron steamer mine is a Black & Decker Clothes Iron ( https://amzn.to/3dxtxgS ).

Btw, my Youtube vlogs and reviews may also have associated affiliate links to products that may earn from qualifying purchases. For items in this video, web page, or vlog, please check out other gift ideas at my Amazon lists. Visit: https://www.amazon.com/shop/sterlingw​​

With newly hemmed pants you need to iron the cuffs to they are flat. To do this you need to align the cuffs, then align the pant’s crease lines. You dont want to add additional creases to the pants. I normally have the cuffs perpendicular to the creases.

I use a ironing board and the Conair Turbo Extreme Iron and Steamer ( https://amzn.to/3GotO1X ). I have used a thick towel before when I did not have a ironing board. Add DISTILLED WATER to your iron or streamer otherwise the mineral deposits of regular water will destroy your steamer after a few uses. My Conair Extreme Turbo Hand Held Steamer ( https://amzn.to/2TWJO8L ) lasted more than four years now because I only use distilled water.

I love the Conair Turbo Extreme as it heats up and streams in about 10 seconds, lightweight, easy to handle, and has a wide hot ironing surface area. Traditional irons need about a minute or two for the iron to heat up to temperature and are heavy.

Ironing the cuffs only take about one minute to do with the Conair Turbo Extreme Iron and Steamer ( https://amzn.to/3GotO1X ) due to the low wait time and large reservoir for water. The traditional iron would have taken 2-3 minutes due to the handling.

Overall I like the new Conair Turbo Extreme Iron and Steamer ( https://amzn.to/3GotO1X ) and can see other uses for this. More so than my Conair Extreme Turbo Hand Held Steamer ( https://amzn.to/2TWJO8L ) that i have owned since 2017!

How to video on shortening and hemming pants. – its really easy with a Singer sewing machine ( https://amzn.to/3C8Xjmw ). It takes about 20 minutes per pair of pants to shorten.

Btw, my Youtube vlogs and reviews may also have associated affiliate links to products that may earn from qualifying purchases. For items in this video, web page, or vlog, please check out other gift ideas at my Amazon lists. Visit: https://www.amazon.com/shop/sterlingw​​

Stuff in this video:
Singer 4322 Heavy Duty Sewing Machine ( https://amzn.to/3C8Xjmw )
Thread Kit for Sewing ( https://amzn.to/3leLqoN )
Hagger Dress Pants ( https://amzn.to/3HXnQqo )
Conair Turbo Extreme Iron and Steamer ( https://amzn.to/3GotO1X )
Black & Decker Clothes Iron ( https://amzn.to/3dxtxgS )
Conair Extreme Turbo Hand Held Steamer ( https://amzn.to/2TWJO8L )

Thanks for watching! Like, Subscribe, Leave a comment, and click the Bell button! Stay tuned for more.

Social Media 

Amazon Shop: https://www.amazon.com/shop/sterlingw
Instagram: https://www.instagram.com/sterling.wong/
Website: https://sterlingwong.com/
X: twitter.com/sterlingwong8

Disclaimer:
This is what i do for entertainment and your viewing entertainment! Some of the stuff are entertaining, while some are just plain silly. If you do anything with your own property, you do so at your own risk.
Due to factors beyond the control of Sterlingwong, I cannot guarantee against improper use or unauthorized modifications of this information. This information is for entertainment only. Sterlingwong assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. Use this information at your own risk. Sterlingwong recommends safe practices when working on personal property , vehicles, and / or with tools seen or implied in this video. Due to factors beyond the control of Sterlingwong, no information contained in this video shall create any expressed or implied warranty or guarantee of any particular rsult. Any injury, damage, or loss that may result from improper use of these tools, equipment, or from the information contained in this video is the sole responsibility of the user and not Sterlingwong.

HOW TO SHORTEN and HEM PANTS with a Sewing Machine – Fast & Easy

I am going to show you how to shorten and hem pants with Singer sewing machine ( https://amzn.to/3C8Xjmw ). It is fast and simple to do. With the need to return to the office, I bought 9 pairs of new wrinkle free performance pants ( https://amzn.to/3HXnQqo ) , however they are too long for me. I needed to shorten and hem them but my local shop was closed.

In this video my Mom taught me how to shorten and hem pants in the fast and easy way using aThread Kit for Sewing ( https://amzn.to/3leLqoN ) and her Singer sewing machine ( https://amzn.to/3C8Xjmw ). It takes about 20 minutes per pair of pants to shorten. The first one took an hour learning.

Btw, my Youtube vlogs and reviews may also have associated affiliate links to products that may earn from qualifying purchases. For items in this video, web page, or vlog, please check out other gift ideas at my Amazon lists. Visit: https://www.amazon.com/shop/sterlingw​​

Stuff in this video:
Singer 4322 Heavy Duty Sewing Machine ( https://amzn.to/3C8Xjmw )
Thread Kit for Sewing ( https://amzn.to/3leLqoN )
Hagger Dress Pants ( https://amzn.to/3HXnQqo )

We used a Singer 4322 Heavy Duty Sewing Machine ( https://amzn.to/3C8Xjmw ) is a gift to my mother as her 25 year old Singer Sewing machine failed after 25 years. She really liked the Singer Sewing machine simple knobs and included accessories. It was also powerful and went through heavy clothe like denim / jeans easily.

SHORTEN and HEM PANTS STEPS:

1. Wash before altering if cloth will shrink
2. Measure length 
3. Pin / mark measure cuff
4. Remove stitches 
5. Cut length with extra for cuff 
6. Cut side  extra fabric overlap hump 
7. Remove side stiches if tapered hem
8. Sew new cross stitch to prevent fraying fabric
9. Sew new straight line hem 
    10. Iron new crease 

We finished all 9 pairs in about 3 hours and have a fun time learning and bonding!

Thanks for watching! Like, Subscribe, Leave a comment, and click the Bell button! Stay tuned for more.

Social Media 

Amazon Shop: https://www.amazon.com/shop/sterlingw
Instagram: https://www.instagram.com/sterling.wong/
Website: https://sterlingwong.com/
X: twitter.com/sterlingwong8

Disclaimer:
This is what i do for entertainment and your viewing entertainment! Some of the stuff are entertaining, while some are just plain silly. If you do anything with your own property, you do so at your own risk.
Due to factors beyond the control of Sterlingwong, I cannot guarantee against improper use or unauthorized modifications of this information. This information is for entertainment only. Sterlingwong assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. Use this information at your own risk. Sterlingwong recommends safe practices when working on personal property , vehicles, and / or with tools seen or implied in this video. Due to factors beyond the control of Sterlingwong, no information contained in this video shall create any expressed or implied warranty or guarantee of any particular rsult. Any injury, damage, or loss that may result from improper use of these tools, equipment, or from the information contained in this video is the sole responsibility of the user and not Sterlingwong.