EASY INSTALL: HELLA Trumpet Horn Kit – No Wire Splicing

For those who want to upgrade their car’s weak horn and be heard. I got myself a set of HELLA Trumpet Horns ( https://amzn.to/39Oa8pk )! I will unbox and install these Hella horns on my car. If you don’t want to deal with splicing wires or buying relays this is the diy video for you.

Btw, my Youtube vlogs and reviews may also have associated affiliate links to products that may earn from qualifying purchases. For more Honda and car DIY ideas check out my Amazon lists:
Visit: https://www.amazon.com/shop/sterlingw

I went with a Hella universal kit ( https://amzn.to/39Oa8pk ) and added a Honda Horn audio adaptor ( https://amzn.to/3bPK5Rl ) . Some horn kits have Honda specific connectors for fast plug and play easy connecting without splicing wires Hella has some many of the car manufacture plugs ( https://amzn.to/39Oa8pk ).

The issue with kits with specific car manufacture specific plugs is the possibility of being positioned in the wrong side of the horn. Your car may not have enough wiring harness to connect the plug. This happened with my Honda Clarity as the cable did not reach the horn plug. It needed another 3 inches of original harness length.

Universal horn kits are more flexible as you can buy an adaptor cable specific for your Honda or other car manufacture. Typical adapter cables are about 3-4 inches in length. The universal horn kit I choose was the Hella Trumpet Hi / Low Horn 113dB – Universal Kit. They had Honda specific connectors but I got the universal fit.

I also ordered a Honda Civic horn adaptor( https://amzn.to/3bPK5Rl )with 2 prongs to match my Honda Clarity. Some other model Honda have single prong as they ground from the mounting bolt to the metal of the car.

The only issue of my Hella Trumpet horns ( https://amzn.to/39Oa8pk ) and 1/4 inch terminals were larger than my 3rd party adapter. I had to make a F2 to F1 adaptor ( https://amzn.to/35TqYSV ) , by using a 16 AWG 1/4″ Female connector terminal from my terminal assortment kit ( https://amzn.to/3sCCewq ) and some electrical tape. I typically use Plastidip in a can ( https://amzn.to/39ImUpu ) to insulate my electrical terminals but the can dried out.

You will need a a flat head screwdriver for the plastic clips that cover the paneling, 12 MM socket for the mounting bolt, and a 10 mm socket wrench for adjusting the angle of the horn mount. After connecting the horn test it out prior to finishing up the cable management.

Enjoy your new louder horns!

Thank you for visiting and supporting SterlingW Youtube Channel!
Thanks for watching! Like, Subscribe, Leave a comment, and click the Bell button!

SOCIAL MEDIA:
Join me on Youtube: https://youtu.be/TFuoiaWgvc4
Instagram: https://www.instagram.com/sterling.wong
Twitter: https://twitter.com/sterlingwong8 ( @sterlingwong8 )
Website: http://www.sterlingwong.com

Disclaimer:
This is what i do for entertainment and your viewing entertainment! Some of the stuff are entertaining, while some are just plain silly. If you do anything with your own property, you do so at your own risk.
Due to factors beyond the control of Sterlingwong, I cannot guarantee against improper use or unauthorized modifications of this information. This information is for entertainment only. Sterlingwong assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. Use this information at your own risk. Sterlingwong recommends safe practices when working on personal property , animals, pets, vehicles, and / or with tools seen or implied in this video. You should always check with your vet to all health matters with your pet and pet care. Due to factors beyond the control of Sterlingwong, no information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. Any injury, damage, or loss that may result from improper use of these tools, equipment, or from the information contained in this video is the sole responsibility of the user and not Sterlingwong.

How to Upgrade Honda “MEEP” Horns without wire splicing on my Honda Clarity

How to Upgrade Honda “MEEP” Horns without wire splicing on my Honda Clarity . After honking several times at distracted drivers with the weak Honda MEEP horns, I decided to upgrade my Honda Clarity with louder deeper horns.

I didnt like the Meep of the factory disk horns so I upgraded to Hella
HELLA 011225831 Black 12V BX Trumpet Horn Kit(Universal Fit) (
https://amzn.to/35Sf9Mq ) with a Honda horn converter plug harness cable so i didnt need to splice the wire. https://amzn.to/3oVB1y4 . I needed to make a terminal connector step down converter ( https://amzn.to/39GLKGp ) to make the harness fit with the Hella.

Btw, my Youtube vlogs and reviews may also have associated affiliate links to products that may earn from qualifying purchases. For more Honda and car DIY ideas check out my Amazon lists:
Visit: https://www.amazon.com/shop/sterlingw

I didnt like the Meep of the factory disk horns so I upgraded to Hella
HELLA 011225831 Black 12V BX Trumpet Horn Kit(Universal Fit) (
https://amzn.to/35Sf9Mq ) with a Honda horn converter plug harness cable so i didnt need to splice the wire. https://amzn.to/3oVB1y4 . I needed to make a terminal connector step down converter ( https://amzn.to/39GLKGp ) to make the harness fit with the Hella.

For those who dont want to deal with splicing wires or buying relays. I went with a universal kit and added a Honda Horn audio adaptor. Some horn kits have Honda specific connectors for fast plug and play easy connecting without splicing wires Hella ( https://amzn.to/39Oa8pk ) and SEINECA Automotive ( https://amzn.to/35VKcaj ) sells car manufacture specific horns.

The issue with kits with specific car manufacture specific plugs is that they are positioned in the wrong side of the horn, and your car may not have enough wiring harness to connect the plug. This happened with my Honda Clarity as the cable did not reach the horn plug. It needed another 3 inches of length. The SEINECA kit ( https://amzn.to/35VKcaj ) was also 125+ dB and was very large horns and did not fit the area of the Clarity.

Universal horn kits are more flexible as you can buy an adaptor cable specific for your Honda or other car manufacture. Typical adapter cables are about 3-4 inches in length. The universal horn kit I choose was the Hella Trumpet Hi / Low Horn 113dB – Universal Kit. They had Honda specific connectors but I got the universal fit.

I also ordered a Honda Civic horn adaptor( https://amzn.to/3bPK5Rl )with 2 prongs to match my Honda Clarity. Some other model Honda have single prong as they ground from the mounting bolt to the metal of the car.

The only issue of my Hella Trumpet horns ( https://amzn.to/39Oa8pk ) and 1/4 inch terminals were larger than my 3rd party adapter. I had to make a F2 to F1 adaptor ( https://amzn.to/35TqYSV ) , by using a 16 AWG 1/4″ Female connector terminal from my terminal assortment kit ( https://amzn.to/3sCCewq ) and some electrical tape. I typically use Plastidip in a can ( https://amzn.to/39ImUpu ) to insulate my electrical terminals but the can dried out.

You will need a a flat head screwdriver for the plastic clips that cover the paneling, 12 MM socket for the mounting bolt, and a 10 mm socket wrench for adjusting the angle of the horn mount.

To remove the Honda Clarity front cover you need to remove the 3 plastic clips, the pull the cover from the side edges straight up out of the fender clips, replace the original horns, disconnect the plugs , and replace with the new plugs and horns, then test it out. There should be no need for any other wiring. After installing and testing, replace all the clips and covers. Remember that the 4 clips have need to be repositioned on to the cover.
Enjoy your new louder horns!

Thank you for visiting and supporting SterlingW Youtube Channel!
Thanks for watching! Like, Subscribe, Leave a comment, and click the Bell button!

SOCIAL MEDIA:
Join me on Youtube: https://youtu.be/TFuoiaWgvc4
Instagram: https://www.instagram.com/sterling.wong
Twitter: https://twitter.com/sterlingwong8 ( @sterlingwong8 )
Website: http://www.sterlingwong.com

Disclaimer:
This is what i do for entertainment and your viewing entertainment! Some of the stuff are entertaining, while some are just plain silly. If you do anything with your own property, you do so at your own risk.
Due to factors beyond the control of Sterlingwong, I cannot guarantee against improper use or unauthorized modifications of this information. This information is for entertainment only. Sterlingwong assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. Use this information at your own risk. Sterlingwong recommends safe practices when working on personal property , animals, pets, vehicles, and / or with tools seen or implied in this video. You should always check with your vet to all health matters with your pet and pet care. Due to factors beyond the control of Sterlingwong, no information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. Any injury, damage, or loss that may result from improper use of these tools, equipment, or from the information contained in this video is the sole responsibility of the user and not Sterlingwong.

Review: Honey-Can-Do Height-Adjustable Rolling Garment Rack – 5 min install Hope it lasts

I got a cheap $20 garment rack ( https://amzn.to/36pbsyx ) from Amazon to organize my clothes and use this to hang stuff. Btw, my Youtube vlogs and reviews may also have associated affiliate links to products that may earn from qualifying purchases.
For home organization and gift ideas, check out my Amazon list. Visit: https://www.amazon.com/shop/sterlingw

I put this together in about 5 minutes. Its a bunch of pipe tubes that are fitted into plastic feet and joints. No glue or screws are needed. Is it stable yes. Is it durable or heavy duty? Only time will tell but I would prefer something more heavy duty as the pipes really thin. The locking plastic clamps are able to dent the chrome piping. It is really light duty and would probably not put any more than 20-30 lbs of weight on it.

Thank you for visiting and supporting SterlingW Youtube Channel!
Thanks for watching! Like, Subscribe, Leave a comment, and click the Bell button!
Visit: https://www.amazon.com/shop/sterlingw

SOCIAL MEDIA:
Join me on Youtube: https://youtu.be/TFuoiaWgvc4
Instagram: https://www.instagram.com/sterling.wong/
Twitter: https://twitter.com/sterlingwong8 ( @sterlingwong8 )
Website: http://www.sterlingwong.com

Disclaimer:
This is what i do for entertainment and your viewing entertainment! Some of the stuff are entertaining, while some are just plain silly. If you do anything with your own property, you do so at your own risk.
Due to factors beyond the control of Sterlingwong, I cannot guarantee against improper use or unauthorized modifications of this information. This information is for entertainment only. Sterlingwong assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. Use this information at your own risk. Sterlingwong recommends safe practices when working on personal property , vehicles, and / or with tools seen or implied in this video. Due to factors beyond the control of Sterlingwong, no information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. Any injury, damage, or loss that may result from improper use of these tools, equipment, or from the information contained in this video is the sole responsibility of the user and not Sterlingwong. 2